BLXWC - Q3-6605 THERMALLY COND ELAST PART B

  • MSDS: BLXWC
  • Manufacturer: DOW CORNING CORP
  • Product Name: Q3-6605 THERMALLY COND ELAST PART B
  • National Stock Number: 8030-00N021227
Product Identification

Product ID:Q3-6605 THERMALLY COND ELAST PART B
MSDS Date:08/11/1986
FSC:8030
NIIN:00N021227
MSDS Number: BLXWC

Responsible Party
DOW CORNING CORP
SOUTH SAGINAW ROAD
MIDLAND, MI 48686
US

Emergency Phone: 517-496-5900

Info Phone: 517-496-5900

Preparer: JACK L SHENEBERGER

Cage: 5D028

Contractor
DOW CORNING CORP
AUBURN, MI 48611 US

Telephone: 517-496-4388

Cage: 71984

Ingredients

NON HAZARDOUS INGREDIENTS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY CAUSE TEMPORARY DISCOMFORT.
SKIN: SINGLE, PROLONGED EXPOSURE CAUSES NO KNOWN ADVERSE EFFECT.
INHAL:NO IRRITATION TO NOSE OR THROAT EXPECTED. NO INJURY IS LIKELY
FROM RELATIVELY SHORT EXPOSURE. INGEST:AMOUNTS TRANSFERRED TO THE
MOUTH BY FINGERS, ETC., DURING NORMAL OPERATIONS SHOULD NOT CAUSE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:INJRUY. COMMENTS:NO KNOWN ADVERSE
CHRONIC HEALTH EFFECTS, BUT UNNECESSARY EXPOSURE TO ANY CHEMICAL
SHOULD BE AVOIDED. THIS PRODUCT, AS WITH ANY CHEMICAL, MAY ENHANCE
ALLERGIC CONDITIONS ON CE RTAIN PEOPLE.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:WIPE OFF
AND FLUSH WITH WATER. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING
(GIVE O2/ARTIFICIAL RESPIRATION) . INGEST:CALL MD IMMEDIATELY (FP N
).

Fire Fighting

Flash Point Method:CC
Flash Point:>200F,>93C
Extinguishing Media:WATER FOG, CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN TO DOW CORNING.

Accidental Release

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT AND CONTAIN.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE REASONABLE CARE AND CAUTION. STORE
BELOW 90F.
Other Precautions:PRECAUTIONS ARE FOR ROOM TEMPERATURE HANDLING, USE AT
ELEVATED TEMPERATURES, OR AEROSOL/SPRAY APPLICATION, MAY REQUIRE
ADDED PRECAUTIONS.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED. NIOSH/MSH APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:GOOD PRACTICE REQUIRES THAT GROSS AMOUNT OF ANY
CHEMICAL BE REMOVED FROM THE SKIN AS SOON AS PRACTICAL, (SUPP DATA)
Supplemental Safety and Health
HYGIENE PRACT:ESPECIALLY BEFORE EATING OR SMOKING. WASHING AT MEALTIME
AND END OF SHIFT IS ADEQUATE.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5
Spec Gravity:2.1
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:<0.1
Appearance and Odor:VERY LITTLE ODOR, PASTE-LIKE, GRAY.
Percent Volatiles by Volume:<5(WT)

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:ACID OR BASIC MATERIALS AND MANY METALS OR
METALLIC COMPOUNDS, WHEN IN CONTACT WITH PRODUCT, LIBERATE FLAMM
HYDROGEN GAS
Hazardous Decomposition Products:METAL OXIDES, SILICON DIOXIDE, CARBON
DIOXIDE, AND TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH ALL LOCAL,
STATE, AND FEDERAL REGULATIONS . CONTACT DOW CORNING IF THERE ARE
ANY DISPOSAL QUESTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.